BattleTech - The Board Game of Armored Combat
BattleTech Miniatures and Terrain => BattleTech Miniatures => Topic started by: worktroll on 13 October 2017, 20:51:25
-
So it's good varnishing weather in my part of Down Under! So I can take pics of these:
(https://lh3.googleusercontent.com/dvBjQfL-v9c4g1IOsGzJrbzH0a0zW2m4BkPde1B5bD6ixHw8Tl-EC2TVVIV2IwepecipzF5Xj_Kabv8XB2ZnrWwz4XxjJ83RmxeSZyJvkGPNFasrWdaR7pSLQksFL8DNAsz3y6sb5kS-n7pCa2xwceMFHjBUHOdSh_ch7vxe8D5mUFgQUa7V-6RiyVL0z_vJW8ByTlTLZSJMc7i8X8Ek18BhG8cGA7S9K-mNKv5r7_NliU1A2vswL1KpsoEAwfN6g2cepzSXI4xnJ3WCSBmi4sCfz814J7sQt6HuIpDkKDzoq1mciY7PDVExXzVisd58KxgcpcgJHy7mgh12hq1uO0-nEjK_9GLoVK-D1fIU-zH9YQInT7kWkUsrSnJdW6dCFA-CprFpgtsvqKdoKVfHBw1ayMF50X-0kiV3wzGKcoPkvi5irL--FbzRbdJrJKPpIQNhp2v7PvDOerfXIhDB8FgzWp8B4vbfbS8MyJGT071_MsTKOq_3TMQFJQgLoll1b-mDcaNFdaATBjFefu76_l2oKFLNIPt8Nc4MAnQpkLqo_QK743jiKRsJHLHCtsPimyPAu0dQn_11AshYydqWJ2g7vRrO7EjSs-X7fIUtPRIOpg7cqR_4oUr8tAh3TylZhYJW6UPDd68rvozjFGHp9lYa97MZGbXVECM=w825-h405-no)
(https://lh3.googleusercontent.com/LFC9hfkGLw6IJz6fbHJHgyuRsICp5VjVWjWZ-dqg0-eygoo3_2xnHHykn7xIL7NyGug80jXxTqEwCff-KXGOq_n71B5aO5-vuIid6NbEo-2qMIcvX1lqEa-drcQQFGfdoLgKmikvm8IpqeWelIo9NOj7jREc00YsWxOrqNoWFiiFEvKzfrIfRNq80svH3mEhtuXS2XZBEGfYT0fO1dbMHK0I7QRdZos4KjVh6hGrWp1YdSmcKJfPYMZllKG_RFQZagzc4yfPj32KvW5R44byYLYNSKLA_eEOB0aJMYC9dhT9hYuxCQB_Q-rQkMbZKYjtY5MNMtq5xGaYFfNh9mx3Be9b7ebPry9_pNbtn-bs0dHCdo88i7NmeJgdgg2wf3rH6b2FSIiARcjZpS2F_97HZ3r6K-IQb4HHugUDNiQUZPvruhLhpcEeiOTjuxCyOINBzOf77cdL-QhSjb5jDtiWqee0gdJTxcMGvjF_fqpLkN-esvZ0xJasgl9TE5IukbO8w7beIJ4Mf9M7Q3zrxD7BCyCrvGPxfJzoXYjYZjW5LeBunVtsPIWF7KcqsHbbIjyHW3l9S0aVjn4kHYlsAYWdkdjtRAo93UcY9eTelWbW06wk9MzeCdjVZ4FB3vUXFbKb7G53KwiMrx-0zW_1XwTfMGMb-wwxpHQ2SBI=w819-h377-no)
So these are my first Classics, and I'm using them as part of a nearly-finished battalion for the 2nd Regulan Hussars.
First thoughts - they're very nice minis (well done, gents!) The Flea and ShadowHawk are of course stock, and I really like the approach taken with one piece "base"/foot/leg/waist. Easy to assemble, capable of being posed in a variety of positions. The ShadowHawk I chose to do running 'around a corner', the Flea more generically sprinting.
The Marauder ... this is the 7R/9D from GenCon, strapped to a caber & tossed in the general direction of the Antipodes. I chose to ... "accurise" it. To me, the whole thing about Marauders is "arms in front". So I did. It's a lovely mini, tons of details; I'll make the 9W2 I got at the same time more 'stock stock', but I'm really happy with both the mini, and the result of my hacks.
Note - they are a bit large. The Flea does dwarf the Unseen Locust in it's lance, but it's OK, there are worse. Just a note for potential purchasers - really, the extra mass and details make this Marauder the one to buy out of the Reseen options. Thoroughly recommended.
More to follow in a few days when varnish is all dry, but comments more than welcome!
W.
-
Nice work WT! They are looking sharp. Can't wait to see the whole battalion 8)
Speaking of which, is it all Mechs or your usual combined arms?
-
O0
-
Fantastic work there!
I think I really need a Flea.
-
Yes, full combined arms in progress. It's my thing ;)
And a quick testimonial to the power of off-brand magic dip!
(https://lh3.googleusercontent.com/xhGXz9PtbWkz8eYkkiym5bj6pnuHIur_cmPTNdwk9XhIFxjW_lspnQk01DXOXbmYwrDKFnbtpdNqHdTvgT8Ij8MZVn7bvLG3xPUdpOU46i9zQYwVZ9yXI3qK5LFlfcZTA86d16KKq0hpWRZxEnIFfBWJWrUaZh2MGIJd45zWnlFsEKSeZZr0DqHDX7PO6ECRaWoHfxP3mfsnBv0gtKjdkuIOK6-qAXKocjvz1BF3LgyS1VAdQjCtZdl-mCVKpuTq4TjiBNAADK3rFydD5s054dZH0SOcdS8xwfc-NBfS7wZLImO4u8Ayyfbrky3glsixS9biwuCWDUBgktOd4Wc-P2sBKqsQovRne82DqIGUCjQw0HV9dsSLx9MMONTXV8h78XZ6zmUmCGXhUQyXpMpDmLMRCWUnN0mtl3UjGVXB7ok5cm8QygkOhpGrPYZyUPvwSqcLvd3_8wvLXKK8eeSm4wY3eORikWBSOggro1r0y5uF5njQC9acsVNKuUIVwp1TJJBII60NtUv7RIfKzUWyVnUeTcd9D1kA80GPRWDjLh1EZ-lW5pg7XvLvoefhsUpYA3o0-QO7ENTW9_AwDTzixrLGP5Dv46lfGd3AFk2ZlJ1eWhcv8TTjBnfB-IxOyzZFT6W5gxgF3a-CDqqfHj8MJyxnlecDnFqopnU=w769-h308-no)
Okay, not the same vee, but the difference in finish is just a coat of teak coloured stain in a polyurethane base. (I call it teak varnish, but apparently there is special varnish used only on teak wood, which is expensive. No, I'm talking a 250ml pot of cheap-ass stain. )
All the panel lining & edge highlighting comes from surface tension pulling the brushed-on varnish around. It also protects the paintjob really well. All you need is a matt spray, and voila!
But allowing for the effect of the stain is important. I wanted a light brown more than a tan, so I went with a yellowish "sand" paint - almost mustard. If I wanted a lighter colour, I'd have based with light sand, or even white.
W.
-
They all look great Worktroll! Yeah, I need to get a Marauder or two...
-
Sweet!
-
They look mighty fine Mr Worktroll O0
-
i am also a huge fan of wood varnish. stateside, I use minwax. the small pots are about $5 at the hardware store