These are a couple of years old. I finished them for the first annual FlintCon back in 2015. (Pics are new. :) )
Magistracy of Canopus
First, the Sha Yu SYU-6B. Pretty easy. Large lasers came off. Plastic tube went on for the Snubbies.
Cataphract CTF-4L. Another easy one. Medium lasers were clipped off the back (Not shown in the picture.) A second medium laser was added to the right arm with a piece of plastic rod and some green stuff. The AC barrel was extended and squared a bit with some green stuff for the Gauss Rifle.
Eyleuka EYL-45B. A little harder. The MML had to be filed off the left arm (Which was good because... it looked molded wrong.) The Snub PPC is a piece of plastic tube (Quick note. Same size as the ones for the Sha Yu) with some green stuff to mount it. It *looks* like it is shoulder mounted, but if you look carefully, it is only attached to the head.
Crusader CRD-8L. Not happy with this one, because after I finished it, I found the actual artwork for it. D'oh. Torso lasers cut off and filed flush. The old launchers on the Popeye fists were filed flat. Holes drilled for the MMLs. Tube drilled in for the Plasma Rifles, with the medium lasers being a dollop of green putty and rounded. I'd consider resculpting this in the future, using the new artwork as a basis for it.
Raven RVN-4Lr. Quite happy with this, though I'd have done the MML's differently in hindsight. Scultped the box over everything on the torso with some greenstuff. Filed to sharper edges. Then crafted the "arm" around a piece of wire for the ER Medium on the left arm.
Marian Hegemony
Catapult CPLT-C5A. Used liquid green stuff to fill in the excess holes. Added an detail on the edges of the LRM launcher to represent that it is an Artemis system. Filled in the large torso gap where the LRM launchers fit with greenstuff and patience. I still prefer the more classic Catapult body shape, but this is an okay replacement. If I were to redo this, I'd probably cut the sides of the launcher away, instead of filling in the holes, and I'd use some plastic or putty to extend the length of the launcher boxes.
Commando COM-2Dr. What can I say about this one? Filled in the torso SRM launcher. Used greenstuff over the arm launcher. Drilled holes. This is probably one of my least favorites, as it was a rush job at the end. I'm not happy with the way the MML came out. Conceptually I like it. But it lacks the detail I would like to have had, and the spacing on the missile tubes is a little off.
Orion ON1-MA. Made it accurate to the TRO. Launcher is in the arms, not the torso. It *is* missing the SRM-6 and left arm Medium laser. Steiner fans might recognize the giant paddle arm as a Salamander's launcher. It was the right tube count. Looked good. I said, "Let's do this!!!" And did.
I didn't get pictures of some of my minor and unfinished bashes. Ti Ts'ang TSG-9J, both Dervish DV-6Mr, the Hollander head replacement with one of my spare Thunderbolt heads from the reseen, and the WIP Swayback (4SP).