Author Topic: Omni parts? (Read 49501 times)

M-Rex · « **on:** 30 January 2011, 11:59:40 »

Folks who have build Omni variants...

...parts lists?

Dak · « **Reply #1 on:** 30 January 2011, 15:18:08 »

http://solaris7.com/Files/Downloads/?Action=FileList&CategoryID=967

Grab my "IWM Omni Guide."

Have fun!
Dak

M-Rex · « **Reply #2 on:** 30 January 2011, 15:22:42 »

Perfect! Thanks Dak.

theplasticone · « **Reply #3 on:** 30 January 2011, 15:58:02 »

Can we please sticky this or make an official Omni parts reference post?

willydstyle · « **Reply #4 on:** 25 June 2011, 02:32:58 »

For my Mad Dog B I used the ERPPPC barrels from the re-seen Warhammer, these ones, sawed the pulse laser barrels off one of the arms, and pinned one of those barrels to the other arm. I then used green stuff over one of the LRM bays to represent SRM missile covers.

I made a mistake and only sculpted 10 doors onto the SRM torso though.

Dr Lucky · « **Reply #5 on:** 09 July 2011, 20:26:59 »

Quote from: Dak on 30 January 2011, 15:18:08

http://solaris7.com/Files/Downloads/?Action=FileList&CategoryID=967

Grab my "IWM Omni Guide."

Have fun!
Dak

I just came upon this as I was trying to shop for bits for some omni-variants. Dak is the man! This document is perfect.

Weirdo · « **Reply #6 on:** 08 August 2012, 10:28:35 »

For those who have seen the parts up close, do you thin the Thor D arms or maybe the Loki A left arm part would work well to create the double plasma cannon arms of the Loki D?

Weirdo · « **Reply #7 on:** 09 August 2012, 13:13:22 »

On a similar note, any advice for converting a Nova Cat into an alternate config, ideally the B or even better, the G?

DarkMessiah · « **Reply #8 on:** 10 August 2012, 05:58:34 »

Quote from: Weirdo on 08 August 2012, 10:28:35

For those who have seen the parts up close, do you thin the Thor D arms or maybe the Loki A left arm part would work well to create the double plasma cannon arms of the Loki D?

The Loki A would probably work fine, but the Thor D arm has two different sized barrels on it.

Quote from: Weirdo on 09 August 2012, 13:13:22

On a similar note, any advice for converting a Nova Cat into an alternate config, ideally the B or even better, the G?

Personally, I like Siberian-troll's Nova Cat-B, although I'm not sure what all he used for it. Mars did a version that would work quite well for an easy conversion, using the LRM launchers from the Limited Edition Catapult.

Weirdo · « **Reply #9 on:** 10 August 2012, 08:11:47 »

Much like Psycho's up on Camo Specs, his N-C B has scratchbuilt pods. That's a little beyond me right now. Maybe I'll just order missile pods from a Grigori Prime, a few of those might work.

Quote from: DarkMessiah on 10 August 2012, 05:58:34

The Loki A would probably work fine, but the Thor D arm has two different sized barrels on it.

I was wondering if the barrels were different, so the Loki A arms it is. Thanks!

Hythos · « **Reply #10 on:** 24 December 2014, 21:50:51 »

20-402B (Uller Arms/Weapon Pods sprue) is the same as OP-069 (Uller Right Arm Upper Sprue),
20-402 (Uller Prime) also has this sprue as a part of the 'kit'.

cavingjan · « **Reply #11 on:** 25 December 2014, 08:02:18 »

Any part that ends in a letter is from the main mini. 20-402B comes from the 20-402 mini.

Berzerker · « **Reply #12 on:** 18 February 2015, 23:52:12 »

Posting to mark for later. I have a few off list omni's I've modded out. Ill post pics and parts lists.

Sazzlefrats · « **Reply #13 on:** 31 January 2017, 18:40:03 »

Too bad that website link is down. Anyway to get old school marauder chicken legs?

worktroll · « **Reply #14 on:** 31 January 2017, 21:55:28 »

Short form, no legit ways. The old Macross-inspired Marauder ain't a mini no more.

Nor do we encourage discussions on non-legit items on CGL's official site.

In terms of legit, you could track down an old mini on ePay and hack it up, but that would just leave you with the same problem one step on.

Gashapon (Japanese bubblegum machine toys) may work, or be too small. RoboTech Tactics Glaug pods are another source, but you may have to cut down their plastic legs to suit.

For really outre sources - track down MFUK Katyusha or Catapult K2 minis, but they're also OOP and rare. The legs share components with the old Unseen mini.

W.

Sazzlefrats · « **Reply #15 on:** 01 February 2017, 12:25:39 »

Quote from: worktroll on 31 January 2017, 21:55:28

Short form, no legit ways. The old Macross-inspired Marauder ain't a mini no more.

Nor do we encourage discussions on non-legit items on CGL's official site.

In terms of legit, you could track down an old mini on ePay and hack it up, but that would just leave you with the same problem one step on.

Gashapon (Japanese bubblegum machine toys) may work, or be too small. RoboTech Tactics Glaug pods are another source, but you may have to cut down their plastic legs to suit.

For really outre sources - track down MFUK Katyusha or Catapult K2 minis, but they're also OOP and rare. The legs share components with the old Unseen mini.

W.

ohh. This isn't CGL's site or is it? Most of my entire collection is early early stuff and I want to be able to ask questions without causing issue. I did find someone but they are in australia, a bit far from california.

So what was the link that was in the 2nd post of this thread, must have been a big deal to make this a sticky thread.

CranstonSnord · « **Reply #16 on:** 02 February 2017, 21:39:09 »

Here is a copy of Dak's guide I grabbed a while ago.

https://docs.google.com/spreadsheets/d/1fJBTfLQHuhG-CyZ_G3j_uSlbdFNzGjQrq6GKayupMKA/edit?usp=sharing

Sjhernan3060 · « **Reply #17 on:** 27 March 2017, 09:09:13 »

I love the Woodsman Omni mech but dislike its chicken arms similar gripe with the KingFisher omni. Does this group have suggestions on which omni parts/pods would fit well to make alternate configs? For reference here are the models I am looking to modify:

http://ironwindmetals.com/store/product_info.php?products_id=8522

and

http://ironwindmetals.com/store/product_info.php?products_id=1937

MiniaturesAssemble · « **Reply #18 on:** 27 May 2018, 07:33:02 »

There is also a DAK's V2 document floating around on Google Docs as well...
https://docs.google.com/spreadsheets/d/1qRIygBubVWHZFVCnb9_10yFyFdmwSDP7rMQN10jofbc/edit?usp=sharing

M-Rex · « **Reply #19 on:** 03 September 2021, 22:05:38 »

10 years later and I still love this thread. Thank you again, those who posted the links to Dak's lists.

Luciora · « **Reply #20 on:** 03 September 2021, 22:23:34 »

You can do a search on the magnetized Omnis and some of the kitbashes I've done recently. I just finished magnetizing a Mad Dog, with the Prime, A,B, C and S configs. Needs priming before i paint it.