BattleTech - The Board Game of Armored Combat
BattleTech Miniatures and Terrain => Iron Wind Metals News and Announcements => Topic started by: speck on 06 June 2021, 20:22:24
-
I know several people have asked about adding some parts to the scrapyard, but I wanted to open a thread for a few weeks to get some additional ideas for what parts to be added. In your reply, please have the SKU, mini name, and what part.
-
How about the wing piece for the Gyrfalcon 4 (BT-450) for those people who want single-piece wings for the other Falcon mechs (Shrike, Gyrfalcon 1, Jade Hawk, etc).
-
I know this may be stretching a wish list, but can we please get the Tail fin and ESPECIALLY the shallow V winglets for the Corsair CSR-V12 (20-702)? I could use about 10 sets.
the winglets from the Sparrowhawk SPR-H5 (20-701) would be nice as well.
i have this thing for those shallow V winglets ... they're always the first dang piece to go missing.
-
I will add them to the list. I will see if I can add any other Fighter Fins as well.
-
Have you checked the scrapyard yet? The Corsair wing parts are already there. And they are the same peice for the Sparrowhawk. Most entries just need pictures at this point for the scrapyard.
https://www.ironwindmetals.com/index.php/categories/cat-battletech/cat-bt-oe/product/battletech-20-702fn/category_pathway-223
I know this may be stretching a wish list, but can we please get the Tail fin and ESPECIALLY the shallow V winglets for the Corsair CSR-V12 (20-702)? I could use about 10 sets.
the winglets from the Sparrowhawk SPR-H5 (20-701) would be nice as well.
i have this thing for those shallow V winglets ... they're always the first dang piece to go missing.
-
Here is my quick list of desired parts:
Dasher "Fire Moth" Prime 20-373 arms
Koshi "Mist Lynx" Prime 20-376 arms
Puma "Adder" Prime 20-400 arms
Fenris "Ice Ferret" Prime 20-414 arms
Black Hawk "Nova" Prime BT-014 arms
Ryoken "Stormcrow" Prime / B 20-320 Prime Arms
Vulture "Mad Dog" Prime 20-600RE arms
Man O War "Gargoyle" Prime 20-386 arms
Masakari "Warhawk" Prime 20-605RE left arm
Blue Flame BLF-21 AR20-229 srm / weapon parts
MDG-1A Rakshasa AR20-638 arms
Thunderbolt IIC 2 20-5180 arms
Locust LCT-1V / 1E / 1Vb Royal 20-5183 weapon sprues
Shadow Hawk SHD-2K BT-399 arms / weapons sprues
Shadow Hawk SHD-2Hb 20-5169 arms / weapons sprue
-
Project Phoenix Phoenix Hawk heads.
Ruger
-
20-5085 Marauder MAD-4X arms
20-5160 Marauder MAD-7D/9D arms
20-5186 Thunderbolt TDR-5S arms and large laser
-
@Luciora
Thank You! I hadn't checked the Scrapyard in a year+ and assumed that my need was still unfulfilled.
-
I was swimming in a bunch of those for a while with all my PP kitbashes ;D
Project Phoenix Phoenix Hawk heads.
Ruger
-
I've been living in the scrapyard for the past year and half now, looking up parts for whole kitbashes, just ask and I'm sure any of us fans would help you ID or suggest parts!
@Luciora
Thank You! I hadn't checked the Scrapyard in a year+ and assumed that my need was still unfulfilled.
-
I am going to have to do some research and see what I need. I think most stuff is already covered. The one piece gyr falcon wing would definitely be a good addition.
-
I was going to suggest the Cobra arms/head sprue but it has appeared since the last time I checked
-
Fulcrum hover tank parts.
Mike
-
I love the new weapons bit kits, but we don't have any Plasma Rifles.
How about the weapon sprue (Plasma Rifle) from the Eisenfaust? Help me out if there's others...
Thanks!
-
Oh.
Svantovit fins
-
The shoulder cannon of the Solitaire i use as a good general purpose Plasma weapon for medium to larger mechs
I love the new weapons bit kits, but we don't have any Plasma Rifles.
How about the weapon sprue (Plasma Rifle) from the Eisenfaust? Help me out if there's others...
Thanks!
-
The Solitaire's main gun a Clan Heavy Large Laser and does not resemble an IS Plasma Rifle, but it is an interesting piece and I'm sure it has its uses.
-
As far as I'm aware, there hasn't been a consistent look for Plasma Rifles in the game's art.
-
In order to comply with Speck's full requirements...
20-5013/Eisenfaust/Plasma Rifle (Torso Weapon)
-
the torso gun sprue from the Ostsol OTL-6D (AR20-215)
-
The Pinto rotor assembly/blades: AR20-287
-
My order of Corsair wingtips came in yesterday. Delivery was 10 days faster than I expected.
-
Do we know when these parts will be available for order? Thanks! :thumbsup:
-
Could we have the jump jets from Thor "Summoner" B BT-011 for all your omnimech needs?
-
20-5085 Marauder MAD-4X arms
20-5160 Marauder MAD-7D/9D arms
20-5186 Thunderbolt TDR-5S arms and large laser
Can I add:
20-784 Myrmidon Medium Tank turrets
20-5093 Lament LMT-2R arms
BT-289 Gestalt D2X-G arms
AR20-667 Tokugawa Heavy Tank turrets
BT-251 Blood Asp A arms
-
It would be nice to have some OmniVehicle turrets for use as variants.
20-290 Ajax Tank Turret
20-395 Manteuffel Tank Turret
-
Could someone help me out and list all of the request up to this post in one thread. That way I can just copy them out so I can start working on the requests.
-
Here you go:
Gyrfalcon 4 (BT-450) Wing piece
Corsair CSR-V12 (20-702) Shallow V winglets and tail fin
Sparrowhawk SPR-H5 (20-701) winglets
Dasher "Fire Moth" Prime 20-373 arms
Koshi "Mist Lynx" Prime 20-376 arms
Puma "Adder" Prime 20-400 arms
Fenris "Ice Ferret" Prime 20-414 arms
Black Hawk "Nova" Prime BT-014 arms
Ryoken "Stormcrow" Prime / B 20-320 Prime Arms
Vulture "Mad Dog" Prime 20-600RE arms
Man O War "Gargoyle" Prime 20-386 arms
Masakari "Warhawk" Prime 20-605RE left arm
Blue Flame BLF-21 AR20-229 srm / weapon parts
MDG-1A Rakshasa AR20-638 arms
Thunderbolt IIC 2 20-5180 arms
Locust LCT-1V / 1E / 1Vb Royal 20-5183 weapon sprues
Shadow Hawk SHD-2K BT-399 arms / weapons sprues
Shadow Hawk SHD-2Hb 20-5169 arms / weapons sprue
Phoenix Hawk (Project Phoenix version) heads
20-5085 Marauder MAD-4X arms
20-5160 Marauder MAD-7D/9D arms
20-5186 Thunderbolt TDR-5S arms and large laser
Fulcrum hover tank parts
20-5013/Eisenfaust/Plasma Rifle (Torso Weapon)
Svantovit fins
Ostsol OTL-6D (AR20-215) Torso weapon sprue
Pinto AR20-287 Rotor assembly and blades
Thor "Summoner" B BT-01 Jump jets
20-784 Myrmidon Medium Tank turrets
20-5093 Lament LMT-2R arms
BT-289 Gestalt D2X-G arms
AR20-667 Tokugawa Heavy Tank turrets
BT-251 Blood Asp A arms
20-290 Ajax Tank Turret
20-395 Manteuffel Tank Turret
-
Here you go:
Gyrfalcon 4 (BT-450) Wing piece
Corsair CSR-V12 (20-702) Shallow V winglets and tail fin
Sparrowhawk SPR-H5 (20-701) winglets
Dasher "Fire Moth" Prime 20-373 arms
Koshi "Mist Lynx" Prime 20-376 arms
Puma "Adder" Prime 20-400 arms
Fenris "Ice Ferret" Prime 20-414 arms
Black Hawk "Nova" Prime BT-014 arms
Ryoken "Stormcrow" Prime / B 20-320 Prime Arms
Vulture "Mad Dog" Prime 20-600RE arms
Man O War "Gargoyle" Prime 20-386 arms
Masakari "Warhawk" Prime 20-605RE left arm
Blue Flame BLF-21 AR20-229 srm / weapon parts
MDG-1A Rakshasa AR20-638 arms
Thunderbolt IIC 2 20-5180 arms
Locust LCT-1V / 1E / 1Vb Royal 20-5183 weapon sprues
Shadow Hawk SHD-2K BT-399 arms / weapons sprues
Shadow Hawk SHD-2Hb 20-5169 arms / weapons sprue
Phoenix Hawk (Project Phoenix version) heads
20-5085 Marauder MAD-4X arms
20-5160 Marauder MAD-7D/9D arms
20-5186 Thunderbolt TDR-5S arms and large laser
Fulcrum hover tank parts
20-5013/Eisenfaust/Plasma Rifle (Torso Weapon)
Svantovit fins
Ostsol OTL-6D (AR20-215) Torso weapon sprue
Pinto AR20-287 Rotor assembly and blades
Thor "Summoner" B BT-01 Jump jets
20-784 Myrmidon Medium Tank turrets
20-5093 Lament LMT-2R arms
BT-289 Gestalt D2X-G arms
AR20-667 Tokugawa Heavy Tank turrets
BT-251 Blood Asp A arms
20-290 Ajax Tank Turret
20-395 Manteuffel Tank Turret
Going to need a whole other office just for these parts! LOL
-
Here you go:
Gyrfalcon 4 (BT-450) Wing piece
Corsair CSR-V12 (20-702) Shallow V winglets and tail fin
Sparrowhawk SPR-H5 (20-701) winglets
Dasher "Fire Moth" Prime 20-373 arms
Koshi "Mist Lynx" Prime 20-376 arms
Puma "Adder" Prime 20-400 arms
Fenris "Ice Ferret" Prime 20-414 arms
Black Hawk "Nova" Prime BT-014 arms
Ryoken "Stormcrow" Prime / B 20-320 Prime Arms
Vulture "Mad Dog" Prime 20-600RE arms
Man O War "Gargoyle" Prime 20-386 arms
Masakari "Warhawk" Prime 20-605RE left arm
Blue Flame BLF-21 AR20-229 srm / weapon parts
MDG-1A Rakshasa AR20-638 arms
Thunderbolt IIC 2 20-5180 arms
Locust LCT-1V / 1E / 1Vb Royal 20-5183 weapon sprues
Shadow Hawk SHD-2K BT-399 arms / weapons sprues
Shadow Hawk SHD-2Hb 20-5169 arms / weapons sprue
Phoenix Hawk (Project Phoenix version) heads
20-5085 Marauder MAD-4X arms
20-5160 Marauder MAD-7D/9D arms
20-5186 Thunderbolt TDR-5S arms and large laser
Fulcrum hover tank parts
20-5013/Eisenfaust/Plasma Rifle (Torso Weapon)
Svantovit fins
Ostsol OTL-6D (AR20-215) Torso weapon sprue
Pinto AR20-287 Rotor assembly and blades
Thor "Summoner" B BT-01 Jump jets
20-784 Myrmidon Medium Tank turrets
20-5093 Lament LMT-2R arms
BT-289 Gestalt D2X-G arms
AR20-667 Tokugawa Heavy Tank turrets
BT-251 Blood Asp A arms
20-290 Ajax Tank Turret
20-395 Manteuffel Tank Turret
Thanks, I will see what I can get done.
-
amend that: strike the Corsair bits. they are already in the scrapyard.
-
Most just need pictures really. The Sparrowhawk parts could be folded in with the Corsair, or offered as a separate one, depending on Speck's decision.
-
Most just need pictures really.
Aries has you covered for that ;)
-
Could we have the jump jets from Thor "Summoner" B BT-011 for all your omnimech needs?
What pieces are those? My Thor Bs have never come with separate bits for the JJs? Do you me the ones for the Thor II JJ that are separate?
-
If you're still taking suggestions, vulture mk III arms
-
I use Aries alot for reference, but it would be even more appropriate for the official site.
Aries has you covered for that ;)
-
Most just need pictures really. The Sparrowhawk parts could be folded in with the Corsair, or offered as a separate one, depending on Speck's decision.
That is a long term goal that I want to work on. I need to set up a dedicated space for doing the image taking, since it will take time to finish. Will have to start with stuff I already have since I am 9 hours away from IWM factory.
-
That is a long term goal that I want to work on. I need to set up a dedicated space for doing the image taking, since it will take time to finish. Will have to start with stuff I already have since I am 9 hours away from IWM factory.
All your efforts are most appreciated. :thumbsup: 8)
-
Yes, thank you Speck!
Is there still a plan to add parts to the Scrapyard this year?
-
Hi Speck, are there plans to add more parts like those identified here to the Scrapyard this year? Thanks!
-
Hi Speck, are there plans to add more parts like those identified here to the Scrapyard this year? Thanks!
I am working on the list from this thread. Waiting on some parts from Mike so I can do pictures. Also working on getting pictures for scrapyard parts.
What parts are you going to request?
-
I was interested in the following:
20-5013/Eisenfaust/Plasma Rifle (Torso Weapon)
Pinto AR20-287 Rotor assembly and blades
20-290 Ajax Tank Turret
20-395 Manteuffel Tank Turret
Thanks!
-
I was interested in the following:
20-5013/Eisenfaust/Plasma Rifle (Torso Weapon)
Pinto AR20-287 Rotor assembly and blades
20-290 Ajax Tank Turret
20-395 Manteuffel Tank Turret
Thanks!
They are on the list already.
-
Oh, if you're asking for new parts... how about the arms and legs from the new Archer ARC-9M? Would be nice to mix with the existing Archer ARC-8M torso...
-
PPC & LRM15 Arms for the redesign Catapult would be nice,,,
-
PPC & LRM15 Arms for the redesign Catapult would be nice,,,
Those are already available.
-
Those are already available.
Oh... nice...
-
I will be getting a good chunk of the list up on the online store soon. The minis I was missing from the list I will have this week so I can start getting pictures.
-
Awesome!!
-
Ryoken (Stormcrow) legs would be nice to have, especially with the extra torsos you end up with when building Stormcrow As and Ds.
-
I would like to see the arms of the new KS Omnis, at least those that are interchangeable.
-
I would like to see the arms of the new KS Omnis, at least those that are interchangeable.
I'd be a while for those at the very least. Not until we get a few of them done by IWM.
The resculpted omni parts are pretty good to use with the new plastics.
-
The Gargoyle/Stormcrow would be a good place to start even without those mechs released. We have the Stormcrow B and TC arms available b/c the resin version, and they can be used on the Gargoyle as well. Offering arms or alternate weapons for the KS plastic before they even release the metal would not be a bad idea- lots of folks have multiples that they could mod.
-
If requests are still being taken, I'd like to submit the arm sprue(I think it's only one sprue for both arms?) for the Flea, the older sculpt.
-
the 20-805 sculpt of the flea only has a single weapon sprue, yes
-
20-5156 - Phoenix Hawk IIC 7 jump jets
RFL7XLTD-11 - LE Rifleman 7X jump jets
-
Bandersnatch arm sprue?
-
20-5156 - Phoenix Hawk IIC 7 jump jets
RFL7XLTD-11 - LE Rifleman 7X jump jets
Oooh, those would be fun to mod onto another mech.
-
20-942RE - Atlas AS7-K hands
-
I have started to add images to parts that were on the web store (such as 20-702 fin sprue) and images of parts on the store now. I am still taking pictures of parts that are on the list and will add the new parts once images are complete on them. Plus I need to get bin letters for some of them from Mike.
-
Thanks for all the hard work!
-
Can't wait for a replacement Pinto rotor blade to fix my broken one! Feels like it's taken a while, but thank you Speck for your hard work!
-
I wanted to give an update on the list below. Notes in BOLD, Pictures taken and just need to add to scrapyard are UNDERLINED, and SKU that I am waiting for in order to get pictures are ITALICS. I have also adding many other pictures of parts that are already listed on the scrapyard. Such as the WOB OmniMech parts, I plan to add parts for there variants in the future.
Here you go:
Gyrfalcon 4 (BT-450) Wing piece
Corsair CSR-V12 (20-702) Shallow V winglets and tail fin NOTE: Already in scrapyard, but added picture
Sparrowhawk SPR-H5 (20-701) winglets
Dasher "Fire Moth" Prime 20-373 arms
Koshi "Mist Lynx" Prime 20-376 arms
Puma "Adder" Prime 20-400 arms
Fenris "Ice Ferret" Prime 20-414 arms
Black Hawk "Nova" Prime BT-014 arms
Ryoken "Stormcrow" Prime / B 20-320 Prime Arms
Vulture "Mad Dog" Prime 20-600RE arms
Man O War "Gargoyle" Prime 20-386 arms
Masakari "Warhawk" Prime 20-605RE left arm
Blue Flame BLF-21 AR20-229 srm / weapon parts NOTE: Pictures taken, but need bin letter from Mike
MDG-1A Rakshasa AR20-638 arms NOTE: parts already in scrapyard, have pictures but waiting for Mike to confirm Bin letters
Thunderbolt IIC 2 20-5180 arms NOTE: Pictures taken, but need bin letter from Mike
Locust LCT-1V / 1E / 1Vb Royal 20-5183 weapon sprues
Shadow Hawk SHD-2K BT-399 arms / weapons sprues
Shadow Hawk SHD-2Hb 20-5169 arms / weapons sprue
Phoenix Hawk (Project Phoenix version) heads NOTE: 20-988 head sprue as been added along with other pictures of parts
20-5085 Marauder MAD-4X arms NOTE: Pictures taken, but need bin letter from Mike
20-5160 Marauder MAD-7D/9D arms NOTE: Pictures taken, but need bin letter from Mike
20-5186 Thunderbolt TDR-5S arms and large laser
Fulcrum hover tank parts
20-5013/Eisenfaust/Plasma Rifle (Torso Weapon)
Svantovit fins
Ostsol OTL-6D (AR20-215) Torso weapon sprue NOTE: Already in scrapyard, but added picture
Pinto AR20-287 Rotor assembly and blades
Thor "Summoner" B BT-01 Jump jets NOTE: There are not JJ parts
20-784 Myrmidon Medium Tank turrets
20-5093 Lament LMT-2R arms
BT-289 Gestalt D2X-G arms NOTE: Pictures taken, but need bin letter from Mike
AR20-667 Tokugawa Heavy Tank turrets NOTE: already in scrapyard, will be adding pictures soon
BT-251 Blood Asp A arms NOTE: Pictures taken, but need bin letter from Mike
20-290 Ajax Tank Turret
20-395 Manteuffel Tank Turret
the 20-805 sculpt of the flea only has a single weapon sprue, yes
-
Just a quick 'thank you' for having the Pariah's jump jet sprue (20-453G) available. They're a key component to making Kit Fox Es!
-
Just a quick 'thank you' for having the Pariah's jump jet sprue (20-453G) available. They're a key component to making Kit Fox Es!
Those are very handy for mods.
-
the gigantic gun arms from Rifleman RFL-X3 MUSE WIND CE-004. Excellent for making dire wolf D.
-
Would it be possible to get the missile launchers from the Mad Cat in the Bounty Hunter set added? They are SRM6s from the S.
They are a really great size for the resculpted Mad Cat. The new missile launcher parts are awesome and great for Omni conversions, but they are way too large on the Mad Cat and look silly. (honestly if we could get a new larger sculpt of the classic Mad Cat/Vulture I would throw lots of money toward funding it, but thats for another thread somewhere)
-
Hi Speck! Thanks for posting the upcoming IWM new releases. Any updates on when the scrapyard parts will be up for sale?
-
Hi Speck! Thanks for posting the upcoming IWM new releases. Any updates on when the scrapyard parts will be up for sale?
They are on my to do list still.
-
Hi Speck! Any updates on adding these parts to the Scrapyard?
-
Waist part for the Vulture / Mad Cat (AR20-600) (AR20-603)
-
Hi Speck! Any updates on adding these parts to the Scrapyard?
Its still on my list to do. I have not forgotten about it.
-
Speck, can you add the SRM / Laser and the weapons sprue for the new Wolverine? BT-472.
Also the Heavy PPC doesn't mount properly to the arm, the back portion is larger than than the other 2 weapons on the sprue, so it gaps instead of snugly fitting.
-
Someone in one of the FB BT Groups was asking about the bits/turrets for the various Scapha Hover Tanks.
Also, Sarna lists I and J models. Any thought to having those turrets made? ??? It's a TSEMP cannon for the I, and 3 MPLs for the J, before anyone asks. :thumbsup:
-
Speck, can you add the SRM / Laser and the weapons sprue for the new Wolverine? BT-472.
Also the Heavy PPC doesn't mount properly to the arm, the back portion is larger than than the other 2 weapons on the sprue, so it gaps instead of snugly fitting.
I have them on my list. I usually wait a while after a release to add the parts. After Gen Con going to work on getting the list from this thread up for sale.
Someone in one of the FB BT Groups was asking about the bits/turrets for the various Scapha Hover Tanks.
Also, Sarna lists I and J models. Any thought to having those turrets made? ??? It's a TSEMP cannon for the I, and 3 MPLs for the J, before anyone asks. :thumbsup:
The turrets for the tank have been on my list for awhile now. Need to get the bin letters. As for more, I doubt it.
-
Hi Speck, any updates on adding these parts to the Scrapyard? Thanks!
-
I think this should be there for all Kurita and Samauri needs; The Shiro flag / banner Piece. Which I have looked for in the bits sections; if it is there already, I can't find it.
-
I think this should be there for all Kurita and Samauri needs; The Shiro flag / banner Piece. Which I have looked for in the bits sections; if it is there already, I can't find it.
I am working on those and finally finishing the list.
-
Speck, could we get the missile plates from the Primitive Crossbow (20-5006) added to the scrapyard? They are perfect for conversions! Thank you!!
-
Speck, could we get the missile plates from the Primitive Crossbow (20-5006) added to the scrapyard? They are perfect for conversions! Thank you!!
I will add to the list
-
I am still going to try and get the new parts up before the current sale is over. Two days ago my toddler got sick (not COVID or flu) but he was nice enough to pass onto my wife and I as well. So it’s been a fun few days and we are all feeling better each day.
-
Get well soon, Speck.
-
Take care of yourselves!
-
Sickest I ever got was when my 3 month old played the role of Typhoid Mary over Thanksgiving and at my grandmother's 90th Bday party six years ago . . . I was sick that night after the party- sitting on toilet and vomiting into the tub. Then the wife got it. Then two cousins who held the baby at the party. Then my sister and her two daughters on their flight home. Once a few people from the party got sick, we figured out who the cause was for our misery.
Meanwhile the baby, who had never been a complainer just had messier diapers and had got me with a projectile spit up (later I figured it was vomiting, not spitting up) without really crying . . . while the adults were just like, 'let me die already.'
Weird, now that I think about it if there was a holiday I got sick it was always Thanksgiving.
Were the old sculpt Stormcrow/Ryoken B arms never put in the scrapyard?
-
Take care of yourselves, Speck and family.
-
Feel better soon!
-
Apologies if this has been mentioned but can we get the Shadow Hawk SRM2 bit in the scrapyard at some point. It would be extremely useful.
-
I am still going to try and get the new parts up before the current sale is over. Two days ago my toddler got sick (not COVID or flu) but he was nice enough to pass onto my wife and I as well. So it’s been a fun few days and we are all feeling better each day.
Get well soon!
-
Could we add the Warcrow A arms and missile launcher sprues from BT-463?
-
Would it be possible to get the Lu Wei Bing's right arm separately to have as an option to convert modern Victor sculpts?
-
Is it possible to get a thunderbolt weapon set for kit bashing. I am trying to make the Sunder - OF
-
Thunderbolt missiles? They offer some generic missile options already, with different missile counts.
-
The below have been added to the web store. I have more to come and some updates from me that I will post later today.
Name SKU Type Price
Lobo (Standard) Waist / Hip and Weapon Sprue 20-205E Scrapyard $3.75
Blue Flame BLF-21 Missile Sprue 20-229E Scrapyard $3.75
Blue Flame BLF-21 Gun Sprue 20-229F Scrapyard $2.50
Ryoken "Stormcrow" Prime Arm Sprue 20-320E Scrapyard $4.50
Ryoken "Stormcrow" Prime Hand Sprue 20-320F Scrapyard $2.50
Galahad "Glass Spider" 3 Radar Dish 20-347D Scrapyard $5.00
Dasher "Fire Moth" Prime Arm Sprue 20-373C Scrapyard $4.00
Dasher "Fire Moth" Prime Missile Launcher and Skirt Sprue 20-373D Scrapyard $3.75
Koshi "Mist Lynx" Prime Arm Sprue 20-376C Scrapyard $4.00
Man O War "Gargoyle" Prime Arm Sprue 20-386C Scrapyard $5.00
Gladiator "Executioner" Prime Arm Sprue 20-393B Scrapyard $5.00
Gladiator "Executioner" Prime Gun 20-393D Scrapyard $3.75
Gladiator "Executioner" Prime Small Jump Jet Sprue 20-393F Scrapyard $3.75
Manteuffel Attack Tank Turret 20-395B Scrapyard $4.25
Manteuffel Attack Tank Weapon 20-395C Scrapyard $3.75
Puma "Adder" Prime Arm Sprue 20-400D Scrapyard $4.00
Great Turtle GTR-1 Right Leg Sprue 20-405B Scrapyard $5.00
Great Turtle GTR-1 Left Leg Sprue 20-405C Scrapyard $5.00
Fenris "Ice Ferret" Prime Arm Sprue 20-414C Scrapyard $4.00
Typhoon RAC Variant Turret 20-456B Scrapyard $3.75
Typhoon RAC Variant RAC Gun Sprue 20-456C Scrapyard $3.75
Raptor II RPT-3X Weapon Sprue 20-465D Scrapyard $3.75
Raptor II RPT-3X Weapon Plate Sprue 20-465E Scrapyard $3.75
Raptor II RPT-3X Weapon Plate and Gun Sprue 20-465F Scrapyard $4.00
Eisenfaust EFT-7X Arm Sprue 20-5013B Scrapyard $5.00
Eisenfaust EFT-7X Shoulder Gun 20-5013C Scrapyard $4.25
Marauder MAD-4X Arm Sprue 20-5085C Scrapyard $5.00
Marauder MAD-7D / 9D Right Arm and Right Leg Sprue 20-5160B Scrapyard $5.00
Marauder MAD-7D / 9D Left Arm and Left Leg Sprue 20-5160C Scrapyard $5.00
Marauder MAD-7D / 9D 7D Gun 20-5160H Scrapyard $3.75
Marauder MAD-7D / 9D 9D Gun Sprue 20-5160I Scrapyard $3.75
Thunderbolt IIC 2 Left Arm and Gun Sprue 20-5180B Scrapyard $6.00
Thunderbolt IIC 2 Right Arm Sprue 20-5180D Scrapyard $4.00
Jupiter 3 Torso Gun Sprue 20-5181E Scrapyard $3.75
Jupiter 3 Gun Belt Sprue 20-5181F Scrapyard $3.75
Locust LCT-1V Arm and CT Med Laser Sprue 20-5183D Scrapyard $4.25
Locust LCT-1E Arm and CT Blank Sprue 20-5183E Scrapyard $4.25
Wolverine WVR-6R / 6D Gun and Missile Sprue 20-5197E Scrapyard $4.50
Vulture "Mad Dog" Prime Arm Sprue 20-600REB Scrapyard $5.00
Thor "Summoner" D Missile Launcher Sprue 20-602C Scrapyard $3.75
Masakari "Warhawk" Prime Arm Sprue 20-605REB Scrapyard $6.50
Sparrowhawk Fighter SPR-H5 Fin Sprue 20-701B Scrapyard $3.75
Flea FLE-15 Arm Sprue 20-805B Scrapyard $3.75
Black Hawk "Nova" Prime Arm Sprue BT-014Arms Scrapyard $5.00
Blood Asp A Lower Arm Sprue BT-251D Scrapyard $6.00
Blood Asp A Jump Jet Sprue BT-251E Scrapyard $3.75
Gestalt D2X-G Right Arm BT-289B Scrapyard $4.00
Gestalt D2X-G Left Arm BT-289C Scrapyard $3.75
Marauder MAD-9W2 Gun and Jump Jet Sprue BT-422D Scrapyard $4.25
Gyrfalcon 4 Toes and TSEMP Gun Sprue BT-450D Scrapyard $4.00
Gyrfalcon 4 Gun Arm Sprue BT-450E Scrapyard $4.00
Gyrfalcon 4 Jump Jet and Wings BT-450F Scrapyard $5.00
-
The below have been added to the web store. I have more to come and some updates from me that I will post later today.
Name SKU Type Price
Lobo (Standard) Waist / Hip and Weapon Sprue 20-205E Scrapyard $3.75
Blue Flame BLF-21 Missile Sprue 20-229E Scrapyard $3.75
Blue Flame BLF-21 Gun Sprue 20-229F Scrapyard $2.50
Ryoken "Stormcrow" Prime Arm Sprue 20-320E Scrapyard $4.50
Ryoken "Stormcrow" Prime Hand Sprue 20-320F Scrapyard $2.50
Galahad "Glass Spider" 3 Radar Dish 20-347D Scrapyard $5.00
Dasher "Fire Moth" Prime Arm Sprue 20-373C Scrapyard $4.00
Dasher "Fire Moth" Prime Missile Launcher and Skirt Sprue 20-373D Scrapyard $3.75
Koshi "Mist Lynx" Prime Arm Sprue 20-376C Scrapyard $4.00
Man O War "Gargoyle" Prime Arm Sprue 20-386C Scrapyard $5.00
Gladiator "Executioner" Prime Arm Sprue 20-393B Scrapyard $5.00
Gladiator "Executioner" Prime Gun 20-393D Scrapyard $3.75
Gladiator "Executioner" Prime Small Jump Jet Sprue 20-393F Scrapyard $3.75
Manteuffel Attack Tank Turret 20-395B Scrapyard $4.25
Manteuffel Attack Tank Weapon 20-395C Scrapyard $3.75
Puma "Adder" Prime Arm Sprue 20-400D Scrapyard $4.00
Great Turtle GTR-1 Right Leg Sprue 20-405B Scrapyard $5.00
Great Turtle GTR-1 Left Leg Sprue 20-405C Scrapyard $5.00
Fenris "Ice Ferret" Prime Arm Sprue 20-414C Scrapyard $4.00
Typhoon RAC Variant Turret 20-456B Scrapyard $3.75
Typhoon RAC Variant RAC Gun Sprue 20-456C Scrapyard $3.75
Raptor II RPT-3X Weapon Sprue 20-465D Scrapyard $3.75
Raptor II RPT-3X Weapon Plate Sprue 20-465E Scrapyard $3.75
Raptor II RPT-3X Weapon Plate and Gun Sprue 20-465F Scrapyard $4.00
Eisenfaust EFT-7X Arm Sprue 20-5013B Scrapyard $5.00
Eisenfaust EFT-7X Shoulder Gun 20-5013C Scrapyard $4.25
Marauder MAD-4X Arm Sprue 20-5085C Scrapyard $5.00
Marauder MAD-7D / 9D Right Arm and Right Leg Sprue 20-5160B Scrapyard $5.00
Marauder MAD-7D / 9D Left Arm and Left Leg Sprue 20-5160C Scrapyard $5.00
Marauder MAD-7D / 9D 7D Gun 20-5160H Scrapyard $3.75
Marauder MAD-7D / 9D 9D Gun Sprue 20-5160I Scrapyard $3.75
Thunderbolt IIC 2 Left Arm and Gun Sprue 20-5180B Scrapyard $6.00
Thunderbolt IIC 2 Right Arm Sprue 20-5180D Scrapyard $4.00
Jupiter 3 Torso Gun Sprue 20-5181E Scrapyard $3.75
Jupiter 3 Gun Belt Sprue 20-5181F Scrapyard $3.75
Locust LCT-1V Arm and CT Med Laser Sprue 20-5183D Scrapyard $4.25
Locust LCT-1E Arm and CT Blank Sprue 20-5183E Scrapyard $4.25
Wolverine WVR-6R / 6D Gun and Missile Sprue 20-5197E Scrapyard $4.50
Vulture "Mad Dog" Prime Arm Sprue 20-600REB Scrapyard $5.00
Thor "Summoner" D Missile Launcher Sprue 20-602C Scrapyard $3.75
Masakari "Warhawk" Prime Arm Sprue 20-605REB Scrapyard $6.50
Sparrowhawk Fighter SPR-H5 Fin Sprue 20-701B Scrapyard $3.75
Flea FLE-15 Arm Sprue 20-805B Scrapyard $3.75
Black Hawk "Nova" Prime Arm Sprue BT-014Arms Scrapyard $5.00
Blood Asp A Lower Arm Sprue BT-251D Scrapyard $6.00
Blood Asp A Jump Jet Sprue BT-251E Scrapyard $3.75
Gestalt D2X-G Right Arm BT-289B Scrapyard $4.00
Gestalt D2X-G Left Arm BT-289C Scrapyard $3.75
Marauder MAD-9W2 Gun and Jump Jet Sprue BT-422D Scrapyard $4.25
Gyrfalcon 4 Toes and TSEMP Gun Sprue BT-450D Scrapyard $4.00
Gyrfalcon 4 Gun Arm Sprue BT-450E Scrapyard $4.00
Gyrfalcon 4 Jump Jet and Wings BT-450F Scrapyard $5.00
Holy poop man! LOL
-
Yay!
-
YAY! Thanks Speck!
-
Aegis fins: BT-137
Aquilla fins: BT-233
Mckenna fins; BT-122
Wagon Wheel fins: AR20-043
-
The below have been added to the web store. I have more to come and some updates from me that I will post later today.
Hey, any update on the other half of the news we were expecting? Looking forward to the release schedule!
-
Aegis fins: BT-137
Aquilla fins: BT-233
Mckenna fins; BT-122
Wagon Wheel fins: AR20-043
Stop it! LOL
-
Can't help I forgot them in my original request! ;D
Stop it! LOL
-
Wagon Wheel fins: AR20-043
Are those just REALLY big trading cards, held on with equally huge clothespins? So as the wheel spins, they go "Clack, clack, clack, clack."? :D
-
Scrapyard request- are we going to get bits listings for the HG and UAC arms to make the new Ares, or a new full kit package?
-
Scrapyard request- are we going to get bits listings for the HG and UAC arms to make the new Ares, or a new full kit package?
I'm definitly interested in this as well. Davion Ares is now needed for my forces as well.
-
Any ideas on why the sprue from the WVR-6R/6D (20-5197) is available but not the spure from the WVR-7M/7M2/7K is not available?
-
Scrapyard request- are we going to get bits listings for the HG and UAC arms to make the new Ares, or a new full kit package?
Do those bits already exist? ???
-
Yes. There already exists a RAC left arm and HGR right, from Aphrodite and Hera, respectively.
-
Yup, and those are the two that I have left to build here so if you tell me I can buy the extra bits later I'll use mine to make an Apollo now!
-
Yup, and those are the two that I have left to build here so if you tell me I can buy the extra bits later I'll use mine to make an Apollo now!
Contact IWM directly with the part descriptions and #s and they might sell just the parts to you.
-
i've done that before
-
Is there any way to get the original P-Hawk JJs here or anywhere?
I have one w/ that is missing just 1 jet, lost somehow, and my original pair of LAMs didn't come with any at all in the boxes. (So 5 single JJs in total)
-
You mean the unseen P-Hawk? Doubtful.
-
Best bet is to ask offsite like one of the Facebook buy and trade groups. Plenty of people still have spare parts and are willing to sell or trade to those in need.
Is there any way to get the original P-Hawk JJs here or anywhere?
I have one w/ that is missing just 1 jet, lost somehow, and my original pair of LAMs didn't come with any at all in the boxes. (So 5 single JJs in total)
-
Scrapyard request- are we going to get bits listings for the HG and UAC arms to make the new Ares, or a new full kit package?
Yes, it’s on my to do list. I want to have the areas weapons up plus see about a new complete ares of that variant, but I have to ask Mike.
Any ideas on why the sprue from the WVR-6R/6D (20-5197) is available but not the spure from the WVR-7M/7M2/7K is not available?
That is due to the one sprue was updated to have both Missile launchers on it and I do not have it. It’s on my next request with Mike.
-
Below list of new scrapyard parts have been added.
Name SKU Type Price
Penetrator PTR-4D Leg Sprue 20-219B Scrapyard $6.00
Penetrator PTR-4D Waist 20-219C Scrapyard $3.75
Warhammer IIC 4 Weapon Sprue 1 20-233C Scrapyard $4.25
Warhammer IIC 4 Weapon Sprue 2 20-233D Scrapyard $4.25
Garm GRM-01A Arm Sprue 20-244C Scrapyard $3.75
Marksman MBT M1 Turret 20-417B Scrapyard $5.00
Marksman MBT M1 Weapon Sprue 20-417C Scrapyard $3.75
Shiro SH-P Banner 20-425E Scrapyard $3.00
Fennec FEC-1CM Antenna Sprue 20-5052D Scrapyard $3.00
Hitotsume Kozo HKZ-1F Banner, Gun, and Left Arm 20-5095B Scrapyard $4.25
Hitotsume Kozo HKZ-1F Right Arm 20-5095C Scrapyard $3.75
Sirocco SRC-3C Left Legs 20-647B Scrapyard $5.00
Sirocco SRC-3C Right Legs 20-647C Scrapyard $5.00
J-27 Tow Vehicle Tractor Body 20-741A Scrapyard $5.00
J-27 Tow Vehicle Trailer Body 20-741B Scrapyard $3.75
Chimera CMA-1S Waist 20-978B Scrapyard $5.00
Grand Titan T-IT-N14R "Vengeance" Gun BT-288E Scrapyard $4.25
Grand Titan T-IT-N14R "Vengeance" Shell Sprue BT-288G Scrapyard $1.50
Shiro SH-2P Banner BT-292G Scrapyard $3.00
Hitotsume Kozo HKZ-1P Banner, Leg and Gun Spure BT-293C Scrapyard $4.25
Hitotsume Kozo HKZ-1P Arm Sprue BT-293D Scrapyard $4.25
Hatamoto-Suna HTM-30S Banner Sprue BT-294F Scrapyard $4.25
Rifleman RFL-X3 MUSE WIND Arm Sprue CE-004Arm Scrapyard $6.00
-
Why would anyone want Penetrator legs? I can't think of anything I'd use them for, at least.
I admit that the... I can't call them knees... make those legs unique, anyway.
-
If we could get the Procyon Quad protomech base that would be a really useful base for all protomechs and battle armor.
-
I'd like to request a left arm from either the resculpted Highlander or the new Battlemaster. I'm looking for a left forearm+hand to stick on a plastic Banshee to make a -3E.
-
The shoulder plates from the new Battlemaster (3500D) would be good too
-
I'd like to request a left arm from either the resculpted Highlander or the new Battlemaster. I'm looking for a left forearm+hand to stick on a plastic Banshee to make a -3E.
(https://i.imgur.com/D326MMf.jpeg)
-
I'd like to request a left arm from either the resculpted Highlander or the new Battlemaster. I'm looking for a left forearm+hand to stick on a plastic Banshee to make a -3E.
I've had great success just using the lower right forearm of a plastic Banshee and flipping it upside down to be the left forearm.
-
I just cut enough of the weapon barrel off and stuff an approximate sized fist into it
-
Nice job. :thumbsup:
-
Wow, that's a proper Banshee, worthy of the name!
What mech is the hand off of?
-
From the Banshee arm in the scrapyard. ;D
Wow, that's a proper Banshee, worthy of the name!
What mech is the hand off of?
-
Very cool! I was afraid it’d be too different in scale.
-
The SRM box from 20-5205 (battlemaster) would be useful, what else is on that sprue?
-
One item I’m interested in would be the arm sprue from the Shadow Hawk-2Hb so we could make 2D models and similar that have the lasers on the LH arm as well.
Can’t remember if that sprue also has the SRM-2 pack as well on it, but that would be useful as well.
Ruger
-
I'm pretty sure that the SRM pods are molded directly onto the torso of the 2Hb mini.
-
I'm pretty sure that the SRM pods are molded directly onto the torso of the 2Hb mini.
The Shadow Hawk minis (2H and 2Hb) have the head mounted SRM-2 as a separate piece.
Ruger
-
Ah. Guess it's been long enough since I put mine together that I'd forgotten that.
-
Can you please, pretty please add jumpship fins (and/or spokes) to the scrapyard? I am in desperate need of a source.
-
Can you please, pretty please add jumpship fins (and/or spokes) to the scrapyard? I am in desperate need of a source.
WOB omnis have some antenna that might work?
-
What specific look do you want? Anvil fins can be very useful.
Can you please, pretty please add jumpship fins (and/or spokes) to the scrapyard? I am in desperate need of a source.
-
Similarly, I'd like to request Gotha tail fins.
-
I'd love to see the Forestry Mech Chainsaw arm in the scrapyard. I have a dumb Ghost variant to build!
-
. . . yes, dumb . . .
The Ghost was such a neat look and offered some potential . . . then got LPPC stupid.
-
I will go through to see what new request there have been for parts and make a list. My next protest is to work thought the parts that I have to process for images for the remaining Scrapyard parts that are missing pictures. The list is pretty big.
-
I would love to see the new AWS-9Q arms available and the WVR-7M, 7M2 options available as well. Those are so good for customizing!
-
I will go through to see what new request there have been for parts and make a list. My next protest is to work thought the parts that I have to process for images for the remaining Scrapyard parts that are missing pictures. The list is pretty big.
I do not envy you man! I was doing it as they came in for restocks for ones that didn't have them on the IWM site, but with the large batch that came through last, just not enough time...ever, to get it all done.
-
I do not envy you man! I was doing it as they came in for restocks for ones that didn't have them on the IWM site, but with the large batch that came through last, just not enough time...ever, to get it all done.
Yeah, it is fun for sure. I have been doing it in batches, but my last trip to IWM I collected the remaining parts that I need for the items missing pictures. Its on my list to do through out this year.
-
Would parts for the new minis that correspond to the CGL set mechs be available? I had one boxed set that was missing an arm. CGL sent a replacement mech, which was nice, but I'd like to get the arm. It's a Battlemaster left arm. The bits I have aren't very close in appearance or are too off in scale to work well.
Thanks in advance for any info.
-
Would parts for the new minis that correspond to the CGL set mechs be available? I had one boxed set that was missing an arm. CGL sent a replacement mech, which was nice, but I'd like to get the arm. It's a Battlemaster left arm. The bits I have aren't very close in appearance or are too off in scale to work well.
Thanks in advance for any info.
The metal Battlemaster arm isn't going to match up well to your plastic one either, unfortunately.
-
Size? Otherwise for 'uniformity' of look it might mean slicing off the remaining arm so it will match up with both that are ordered.
-
The metal minis, especially the Battlemaster, have some degree of shrinkage compared to the plastic minis they're based on. Has to do with the amount that pewter shrinks as it cools vs the amount the plastic shrinks as it cools.
-
I've been swapping metal for plastic parts in alot of my custom builds, and really haven't come across anything too horribly unscaled between the plastic and metal versions of the mechs so far.
-
Would parts for the new minis that correspond to the CGL set mechs be available? I had one boxed set that was missing an arm. CGL sent a replacement mech, which was nice, but I'd like to get the arm. It's a Battlemaster left arm. The bits I have aren't very close in appearance or are too off in scale to work well.
Thanks in advance for any info.
Fill out the contact form on IWM website and we can do a email order (PayPal payment) for what you need of the Battlemaster parts.
-
The metal minis, especially the Battlemaster, have some degree of shrinkage compared to the plastic minis they're based on. Has to do with the amount that pewter shrinks as it cools vs the amount the plastic shrinks as it cools.
Which is why I said remove the one arm that is present . . . they may seem large or small, but they will be symmetrical on the mini and unless horribly small it will not really stand out unless it is next to a regular plastic Battlemaster.
-
About to start taking pictures of the 100+ parts that need images for the scrap yard. Will be going by SKU groups and I will note any new items that are added when I do the groups.
-
How do the sprues work on the new IWM Urbanmech? Is there a weapon sprue that could be offered for people wanting to convert all their plastic Urbs?
-
Any chance of adding the arm options from the Ryoken B/TC to the scrapyard?
-
About to start taking pictures of the 100+ parts that need images for the scrap yard. Will be going by SKU groups and I will note any new items that are added when I do the groups.
As a retailer...I sincerely appreciate the notice. Sifting through all the images that need pics can be daunting for us. Thank you!
-
Any chance of adding the arm options from the Ryoken B/TC to the scrapyard?
I will add to the list.
-
May I please get the Hip/Waist for the OG Timber Wolf / Vulture?
Yeah.
THAT one. the PITA one.
I'll need two. correction. better make it three.
get myself another spare as I try to pin the hips on these OG OmniMechs.
Hopefully I can fix these before I pass out from blood loss.
ow. the fingers.
-
Weird I could have sworn it was available under the Vulture legs section.
May I please get the Hip/Waist for the OG Timber Wolf / Vulture?
Yeah.
THAT one. the PITA one.
I'll need two. correction. better make it three.
get myself another spare as I try to pin the hips on these OG OmniMechs.
Hopefully I can fix these before I pass out from blood loss.
ow. the fingers.
-
The hips aren't listed in the Scrapyard, but the legs and feet both are. Not sure which Vulture mini they're for, though- the original or the resculpt.
-
I recently got a near mint box #10-842 the Heavy OmniMechs box.
Box looks great, but there are a few missing bits.
...and the IWM online store won't allow me to log in... :(
and I cannot find this specific hip piece in the scrapyard.
...sorry for the ebay image, can't find it elsewhere: please resize as needed.
:embarrassed:
(https://i.ebayimg.com/images/g/imUAAOSwzddfK9JB/s-l1600.jpg)
-
Yeah, I knew which set of hips you were asking for. Its the same peice as the OG Vulture. I just thought I remembered them being in the same scrapyard set as the Vulture, but that may have just been the legs and base for the first release.
Old faulty memory I'm sure. Plus with all the kitbashing I do, I may have had a spare one before and just misremembered.
-
If there are any discrete plasma cannons or sprues that have one or more that would be a nice addition for conversions.
-
I like the Solitaire weapon sprue for that one.
Also, Speck, more of a request than anything else, but how about adding the Black Watch logo as an accessory pack like the AMS/TAG/PROBE/ECM sprue? Especially with the Star League packs coming out?
If there are any discrete plasma cannons or sprues that have one or more that would be a nice addition for conversions.
-
Sounds like an opportunity for fan funding...
-
I like the Solitaire weapon sprue for that one.
Definitely a solid choice and what I have been using. Adds up when you need four of them for one model though.
-
I'd love to see the Woodsman arms added to the scrapyard selection, assuming they are on their own sprue and not bundled with the legs or something.
-
Ostwar missile arms 20-5115
Banshee 11X arms 20-5072
Carronade arms 20-5110
Enforcer arms and bits 20-448
-
I have a large amount of images to process for the scrapyard and some new parts as well. Once I have them uploaded, I will review the posts for new requests.
-
I have a large amount of images to process for the scrapyard and some new parts as well. Once I have them uploaded, I will review the posts for new requests.
Also please let us know what new items were put into the store!
-
Also please let us know what new items were put into the store!
I will note that when I give the update after I add the images.
-
I will note that when I give the update after I add the images.
Awesome! Thank you
-
I don't know what kind of demand there would be for it, but I'd like to be able to buy the missile pods from the War Crow prime.
I just bought the limited edition, old school looking Catapult and I want to make it look set-up for underwater operations. I'm hoping to find some aerodynamic (hydrodynamic?) LRM-15s to represent some LRT launchers for the project. I think the rounded front on the War Crow missile racks would look nice. Something even pointier would work as well.
Cheers! :smiley:
-
I don't know what kind of demand there would be for it, but I'd like to be able to buy the missile pods from the War Crow prime.
I just bought the limited edition, old school looking Catapult and I want to make it look set-up for underwater operations. I'm hoping to find some aerodynamic (hydrodynamic?) LRM-15s to represent some LRT launchers for the project. I think the rounded front on the War Crow missile racks would look nice. Something even pointier would work as well.
Cheers! :smiley:
I can add them to the list.
-
Can't remember if it's been asked before, but is there any chance we could get the Saracen turret added to the Scrapyard, please?
(Original, not the Mk II)