BattleTech - The Board Game of Armored Combat

BattleTech Game Universe => The Periphery => Topic started by: bblaney on 14 November 2017, 18:07:04

Title: Periphery mech designs
Post by: bblaney on 14 November 2017, 18:07:04

Can I get some assistance with Periphery based designs?

What I mean is official designs that periphery states designed, including Amaris designs.

If you got a list or a link I would be in your debt.

Thanks

Title: Re: Periphery mech designs
Post by: Maelwys on 14 November 2017, 19:44:06

Designed, as opposed to just built? And any particular era?

Title: Re: Periphery mech designs
Post by: Easy on 14 November 2017, 20:46:11

cleanup

Title: Re: Periphery mech designs
Post by: Saint on 14 November 2017, 21:42:45

Rampage
Brahma
Talos
Toro
Arbiter
Quasit
Eyeluka
Brigand
Merlin
Calliope
Marshal
Phoenix

Title: Re: Periphery mech designs
Post by: Maelwys on 14 November 2017, 23:22:44

There's also the Agrotera and Ebony, and various Penthesileas.

A couple of the later Anubises indicate that they're developed by the Magistracy rather than the Capellans (3MC and 5Y).

There's the Deep Lord MilitiaMech and the Scavenger SalvageMech and MilitiaMech, and the Vampyr.

I also want to say one of the Koschei's was developed by the Magistracy, but can't recall off hand.

Edit
Oh, and the 3MC Banshee was presumably designed by them as well. Not sure if it counts
/edit

Title: Re: Periphery mech designs
Post by: bblaney on 16 November 2017, 12:13:26

Designed and considered periphery state mechs.

The reason I'm doing this, in a campaign I played in for years, the PCs did some interesting things, and in return they are turning 5 designs from each house into an omni.

Periphery is the one giving me fits

Thanks!!!!!

Title: Re: Periphery mech designs
Post by: Sharpnel on 16 November 2017, 12:41:44

Quote from: bblaney on 16 November 2017, 12:13:26

Designed and considered periphery state mechs.

The reason I'm doing this, in a campaign I played in for years, the PCs did some interesting things, and in return they are turning 5 designs from each house into an omni.

Periphery is the one giving me fits

Thanks!!!!!

Go with a 55-tonner as the Wolverine, Griffin and shadow Hawk were all built in Periph at one time or another

Title: Re: Periphery mech designs
Post by: Intermittent_Coherence on 24 November 2017, 07:44:30

Shadowhawk in the MOC and Griffin in the TC.
Not sure if Wolverines are still being produced in the former RWR.

Title: Re: Periphery mech designs
Post by: GermanSumo on 26 April 2018, 16:13:55

hhmmm nobody mentioned the HawkWolf ... but it seems im doing thread necromany :D

Title: Re: Periphery mech designs
Post by: Elcor05 on 27 April 2018, 00:15:52

Also the Cadaver!

Title: Re: Periphery mech designs
Post by: bblaney on 29 April 2018, 17:07:47

Thanks guys and gals!!!!!

Title: Re: Periphery mech designs
Post by: Natasha Kerensky on 30 April 2018, 09:32:35

I don't see the Brigand mentioned yet.

Title: Re: Periphery mech designs
Post by: Deadborder on 30 April 2018, 18:43:14

Saint mentioned it up-thread

I love that little menace

Title: Re: Periphery mech designs
Post by: blackjack on 20 May 2018, 17:50:25

Quote from: Deadborder on 30 April 2018, 18:43:14

Saint mentioned it up-thread

I love that little menace

Same here.  >:D

Title: Re: Periphery mech designs
Post by: Hellraiser on 03 June 2018, 02:35:44

Merlin was the original "Periphery" mech from 3025.

Pretty much all the "unseen" are produced in 1 periphery realm or another.

If I had to pick 5..........

Assault - Rampage
Heavy - Merlin
Medium - ShadowHawk & Phoenix
Light - Brigand

That gives you a nice combo of general purpose mobility with a big boy for breaking down the doors.
Perfect for Omnification.

Title: Re: Periphery mech designs
Post by: Colt Ward on 05 June 2018, 14:00:30

For heavy I would prefer the Hound . . . its solid multi-role trooper . . .

Quick question . . . so the Toro & Dervish on Filtvelt production lines get updated to standard mechs as time goes on from the Jihad.  Toro is easy, you make the A-6 which fits with what Filtvelt can produce.  The Dervish . . . well, it has a LOT of options.  Does it go to the 6 series?  Or a 6 series improved, like (Turner) or -6Mr?  I would be surprised to see it go with a 7, 8 or 9 series.

Title: Re: Periphery mech designs
Post by: Deadborder on 05 June 2018, 16:13:33

Given it's presence on periphery RATs (With all the usual discliamers) I figure it's an out the door version of the 6Mr.

Title: Re: Periphery mech designs
Post by: Colt Ward on 05 June 2018, 16:39:20

Probably, I was not looking at the RATs . . . forgot I had the ER/FM3145 books on my kindle, lol.

IIRC Filtvelt trades with Randis (Hound for Hawkwolves), it gives the Filtvelt forces some interesting choices for facing the Dracs as they come to the rescue- Hawkwolves, Hounds, Dervishes, Toros and then decent med vehicles.