Recent Posts

1

Ground Combat / Re: Clan Large Pulse Lasers

« Last post by Charistoph on Today at 01:40:13 »

I don't know.  Friendly fire's not so bad if you can see the Hex you're hitting.  A +3 is MUCH easier to hit than a +7, after all.

The only question is in weird situations where a nearby hex may cause a hex to be unseeable due to its Level.  I've posted the question up board, but haven't gotten an answer yet.

2

Clan Chatterweb / Re: Lower caste knowledge of tukkayid before, during and after

« Last post by parable on Today at 01:39:26 »

WoK begs to differ.

Just to provide the reference for anyone w/o WoK--p. 61 "Free speech is discouraged, and nonessential communications are tightly controlled.  Most apartments come with communications equipment, but sophisticated computer systems monitor its use and note any "inappropriate" communications.  The precise definition of "inappropriate" is somewhat nebulous."  It then goes on to describe that the Smoke Jaguars might penalize a laborer for using the Chatterweb to arrange for babysitting while they attended some nonmandatory event, but that the Diamond Sharks prefer seeing what benefits unencumbered communication brings (not that they aren't severely limiting speech thought of as subversive.  The weakness of their spies aside, the Clans are masters at information control within their own.

3

BattleTech Miniatures / Re: Miniatures of the Fortnight #166: Blood Reaper and Onager

« Last post by Luciora on Today at 01:34:14 »

Wolf Dragoons Blood Reaper, Beta Regiment
Jade Falcon Onager, Vau Galaxy

4

BattleTech Miniatures / Re: Charistoph's Painted Products of Mechanical Mayhem

« Last post by Charistoph on Today at 01:29:34 »

So, running a campaign for Operation Revival, I needed to have some more Combat Vehicles, particularly I wanted some lighter tanks to support my Pattons.

So I grabbed 2 pairs of Goblins.  As I prepared the list for the latest scenario, I noted that the Goblins had an LRM version.  With the Rocket Launchers I didn't use from the latest Goliath, I decided to make a pair of Goblins (LRM).

The full set:


The "normal" Goblin models from IWM infantry support vehicle model:


And my "upgraded" Goblins (LRM):


I could definitely use a smaller model saw, and some green stuff, but it does work out in looking like a ramshackle field modification.

5

Fan Articles / Re: Mech of the Week: Deimos

« Last post by MoneyLovinOgre4Hire on Today at 01:14:43 »

Not counting designs that use massed one-shot weapons like rocket launchers, is there anything that comes close to the alpha strike overheat level of the B?  Off the top of my head, the worst I can think of is the Kodiak, which hits 30 on an alpha if both streak pods connect.

6

Fan Articles / Re: Mech of the Week: Deimos

« Last post by Scotty on Today at 00:59:08 »

Worth mentioning, the D benefits from Streak on the LRMs helping with the heat curve.  With 14 doubles you have 10 from the ER MLs, another 10 for the RACs on optimal ROF, 2 from movement, possibly one from AMS to put you at 23 before the LRMs.  One LRM locks and you're at +0-1, if both lock you're at +6-7 but you've also done at least 40 damage to your target.  If your hit numbers are 7+, you're 50-50 to gain any heat at all.  Worse numbers and you're less likely to have any heat issues at all.

7

Fan Designs and Rules / Re: Heavy Duty v. Armored Gyro

« Last post by PuppyLikesLaserPointers on Today at 00:55:36 »

It's worth noting that crit starved as well as has lower engine rating to ship most of its stock heat sink within the engine, not only crit starved. For heavier mechs, sometimes it's better to push the engine rating far more than ideal weight to buy more internal heat sink capacity. But for light mechs sometimes it's not so easy.

Still CHS is only useful on very, very specific situation over DHS, makes it usually neglectable. You better forget about it for good, until when you face the situation that you really, really needs to even consider CHS for a very weird reason.

8

Ground Combat / Re: Clan Large Pulse Lasers

« Last post by PuppyLikesLaserPointers on Today at 00:48:25 »

I am going to disagree on both of these one BT really doesn't hit isn't own to you play on some larger size playing areas.  Then a lot of units that don't in little battlefields start making sense.   Two artillrey is actually quit fun to use on the battlefield.  Would I use it on a 1X1 map game no.   But honstly I would rather not play than play on such a small playing area.

The funny thing is on 1x1 map the artillery would see its uses mostly, although it also causes massive amount of friendly fire meanwhile. Well it is unlikely to have a debate for the uses of 1x1 map on here. To me 1x1 isn't something even playable unless all the units both players will play is the infantry.

The size of the map is not my concern on here, though. Did you think that the size means the size of the map? Then it's sorry for that's not I want to mean - it's the size of the unit, the level of formation on each force. Perhaps a lance of armor would be playable, but I doubt for the battalion of those.

Well, TAG guided ammunition does exists thats an another topic, right? For it needs the actual hit of TAG, of the ground/aerospace units on there. Also as I know no TAG guided ammunitions have the blast radius of 1 or more.

9

BattleMechs / Re: Thug IIC (KISS principle at work)

« Last post by VanVelding on Today at 00:32:53 »

I like the addition of the LAMS, but the Thug is based on simplicity. It's not a Clan 'mech with all the overwhelming power that comes with it, but it's a tough upgrade that uses Clantech effectively.

Code: [Select]

Thug IIC

Mass: 80 tons
Chassis: Earthwerks VOL Endo Steel
Power Plant: Pitban 320
Cruising Speed: 43.2 kph
Maximum Speed: 64.8 kph
Jump Jets: None
     Jump Capacity: 0 meters
Armor: Mitchell Argon with CASE
Armament:
     2 ER PPC
     2 Streak SRM 6
Introduction Year: 3080
Tech Rating/Availability: F/X-X-F-D
Cost: 10,016,040 C-bills

Type: Thug IIC
Technology Base: Clan (Standard)
Tonnage: 80
Battle Value: 2,392

Equipment                                          Mass
Internal Structure            Endo Steel              4
Engine                        320 Fusion           22.5
Walking MP: 4
Running MP: 6
Jumping MP: 0
Double Heat Sink              19 [38]                 9
Gyro                                                  4
Cockpit                                               3
Armor Factor                  247                  15.5

                          Internal   Armor   
                          Structure  Value   
     Head                    3         9     
     Center Torso            25        34   
     Center Torso (rear)               16   
     R/L Torso               17        25   
     R/L Torso (rear)                  9     
     R/L Arm                 13        26   
     R/L Leg                 17        34   

Right Arm Actuators: Shoulder, Upper Arm, Lower Arm, Hand
Left Arm Actuators: Shoulder, Upper Arm, Lower Arm, Hand

Weapons
and Ammo                 Location  Critical   Heat    Tonnage
Double Heat Sink            LL        2        -       1.0   
Double Heat Sink            CT        2        -       1.0   
CASE II                     RT        1        -       0.5   
Streak SRM 6                RT        2        4       3.0   
Double Heat Sink            RT        2        -       1.0   
Streak SRM 6 Ammo (15)      RT        1        -       1.0   
Double Heat Sink            LA        2        -       1.0   
ER PPC                      LA        2        15      6.0   
CASE II                     LT        1        -       0.5   
Streak SRM 6                LT        2        4       3.0   
Double Heat Sink            LT        2        -       1.0   
Streak SRM 6 Ammo (15)      LT        1        -       1.0   
Double Heat Sink            RL        2        -       1.0   
ECM Suite                   HD        1        -       1.0   
Double Heat Sink            RA        2        -       1.0   
ER PPC                      RA        2        15      6.0

10

General BattleTech Discussion / Re: Upcoming Releases XXIX: First Annual 29th Birthday

« Last post by Jal Phoenix on Today at 00:14:42 »

I live in Florida. We have a handful of good days every month in the summer to prime, and then maybe like a good 3 or 4 all winter. Spring and Fall are write-offs if you spray prime, because it is just always too humid to do so. This is why I have switched completely to brush on primers. Understand that it being too dry can also cause issues, as the primer is drying before it hits the model. Too hot and too cold also impact how the primer goes onto the miniatures. So, if you live in area with wild weather variations(Florida in the US, the city of Melbourne in the Australia that experiences all 4 seasons in a single day), spray primers are just a waste.

I don't have these kinds of difficulties. I spray prime and dullcoat outside all year round. I just check that the humidity is 60 or below first. Even in summer, it gets that low most days. Tuesday was our first day of rain for almost two months. Before that, it was entire weeks of humidity down into the 20s.