1
Clan Chatterweb / Re: Rasalhague Dominion: The voting will continue until morale improves!
« Last post by Jellico on Today at 17:03:46 »The Wulfen has been on the Dominion RAT in FM:3145 in 2013.
Recent Posts
2
BattleMechs / Re: Filling in the Syberian AutoMechs (Open Thread)
« Last post by Luciora on Today at 16:59:25 »Tracks and Wheeljack are my favorite kitbashes.
3
BattleMechs / Re: Filling in the Syberian AutoMechs (Open Thread)
« Last post by Lycanphoenix on Today at 16:38:55 »From the perspective of AutoMechs... Omni technology would be the "medical" discovery of the century.
4
BattleMechs / Shadow Hawk SDH-4M. Succession War trooper medium
« Last post by Isokrates on Today at 16:33:44 »Code: [Select]
Shadow Hawk SHD-4M
Mass: 55 tons
Tech Base: Inner Sphere
Chassis Config: Biped
Rules Level: Introductory
Era: Succession Wars
Tech Rating/Era Availability: D/X-E-D-D
Production Year: 3025
Dry Cost: 4.848.607 C-Bills
Total Cost: 4.905.607 C-Bills
Battle Value: 1.269
Chassis: Earthwerks SHD Standard
Power Plant: CoreTek 275 Fusion Engine
Walking Speed: 54,0 km/h
Maximum Speed: 86,4 km/h
Jump Jets: Pitban LFT-50
Jump Capacity: 150 meters
Armor: Maximillian 43 Standard Armor
Armament:
1 Large Laser
1 SRM-6
2 Medium Lasers
1 LRM-5
Manufacturer: Earthwerks Incorporated, Majesty Metals and Manufacturing
Primary Factory: Calloway VI (Earthwerks), Dunianshire (Majesty)
Communications System: O/P 300 COMSET
Targeting and Tracking System: O/P 2000A
================================================================================
Equipment Type Rating Mass
--------------------------------------------------------------------------------
Internal Structure: Standard 91 points 5,50
Engine: Fusion Engine 275 15,50
Walking MP: 5
Running MP: 8
Jumping MP: 5 Standard
Jump Jet Locations: 1 CT, 2 LT, 2 RT 2,50
Heat Sinks: Single Heat Sink 12 2,00
Heat Sink Locations: 1 CT
Gyro: Standard 3,00
Cockpit: Standard 3,00
Actuators: L: SH+UA+LA+H R: SH+UA+LA+H
Armor: Standard Armor AV - 152 9,50
Internal Armor
Structure Factor
Head 3 9
Center Torso 18 23
Center Torso (rear) 6
L/R Torso 13 19
L/R Torso (rear) 5
L/R Arm 9 14
L/R Leg 13 19
================================================================================
Equipment Location Heat Critical Mass
--------------------------------------------------------------------------------
Medium Laser RA 3 1 1,00
Medium Laser LA 3 1 1,00
SRM-6 RT 4 2 3,00
Large Laser LT 8 2 5,00
LRM-5 HD 2 1 2,00
@LRM-5 (24) RT - 1 1,00
@SRM-6 (15) RT - 1 1,00
Free Critical Slots: 32
BattleForce Statistics
MV S (+0) M (+2) L (+4) E (+6) Wt. Ov Armor: 5 Points: 13
5j 3 3 1 0 2 0 Structure: 5
Special Abilities: SRCH, ES, SEAL, SOA
5
Challenges and Gatherings / Re: BattleForce California Mid-Valley Turlock area
« Last post by Zematus737 on Today at 16:31:35 »A black and white laser printer can handle the manual printouts better when done 20 pages (double-sided) at a time. Keep the tray as full as you can to stress the rollers less and minimize misfeeds. First print the odd pages out and then reinsert the 20 pages and print out the even pages in reverse order for the other side. If you begin with an odd amount of pages for the first or last batch, reverse the order of printing or remove last page printed out. You will eventually get through the whole manual with minimal catastrophic printing issues. Use a medium sized binder clip to hold the pages together. Taping the first and last corner where the binder clip goes will prolong the life of the printout. This is the most cost effective way, I have found, to print out several full sized manuals.
6
BattleTech Game Rules Questions / MOVED: Trying to understand how the infantry anti-mech attacks rules work
« Last post by Hammer on Today at 16:28:28 »7
BattleMechs / Re: Filling in the Syberian AutoMechs (Open Thread)
« Last post by HABeas2 on Today at 16:27:21 »Let's see...
Jacks, Leaders, and Lifters...
I *NEED* to be writing stuff soon!
- Herb
Jacks, Leaders, and Lifters...
I *NEED* to be writing stuff soon!
- Herb
8
Fan Articles / Re: Mech of the Week: P1 Perseus
« Last post by Wrangler on Today at 16:26:29 »Maybe Wolves will make a R configuration with Clan tech weapons
9
MechWarrior Hall / Re: Word Association 36: SAY WHAT AGAIN!!!
« Last post by Wrangler on Today at 16:24:03 »Hatch
10
Challenges and Gatherings / BattleForce California Mid-Valley Turlock area
« Last post by Zematus737 on Today at 16:16:51 »Throwing this out to see if there are any Battletech players near my area interested in learning the different scales to play, eventually, a Succession Wars campaign. That would be the end goal. To start we will be gaining our sea legs with Planetary Assault Map invasions and using the Battleforce map layered in 2 sheets, 4 sheets and, finally what will represent a comparable SBF scale map, 6 sheets.
What is needed:
A general understanding of Battleforce and Battletech or AlphaStrike.
The only game manual recommended to have for review and referencing: IO:Battleforce
If you don't have the Battletech Battleforce Counters Pack you can buy a 20pack of bottled beer and save the caps. The caps can be used as Commands and Units.
Review my post link below and download the Player Aids if you feel they are helpful. Print out the tables and sheets at the back of the IO:BF book as well.
https://bg.battletech.com/forums/index.php?topic=84501.0
If you desire to form your own armies and fill out your own sheets, find several helpful eras at the following Google drive: www.tinyurl.com/zematusbf
I look forward to hearing from any of you and will open a Discord if this gains enough traction to become regular.
What is needed:
A general understanding of Battleforce and Battletech or AlphaStrike.
The only game manual recommended to have for review and referencing: IO:Battleforce
If you don't have the Battletech Battleforce Counters Pack you can buy a 20pack of bottled beer and save the caps. The caps can be used as Commands and Units.
Review my post link below and download the Player Aids if you feel they are helpful. Print out the tables and sheets at the back of the IO:BF book as well.
https://bg.battletech.com/forums/index.php?topic=84501.0
If you desire to form your own armies and fill out your own sheets, find several helpful eras at the following Google drive: www.tinyurl.com/zematusbf
I look forward to hearing from any of you and will open a Discord if this gains enough traction to become regular.
