Register Register

Author Topic: Lyran Guards -- AGOAC mechs  (Read 846 times)

RazorclawXLS

  • Sergeant
  • *
  • Posts: 116
Lyran Guards -- AGOAC mechs
« on: 09 October 2019, 13:55:07 »
I finished varnishing my AGOAC mechs, so I thought of showing them off here.

It has been one hour since sunset, so I don't have enough daylight for proper photos and settled on this group shot for now. Will probably do more pics on the weekend.

I painted them as generic Lyran Guards, the only decals I intend to put on them are going to be either Lyran Commonwealth or Federated Commonwealth. I will not be putting unit insignias on them as I intend to milk them as much as possible, so they will represent any and all Lyran Guard unit.

I am not that familiar with lore so I don't know if units from the Lyran portion of Federated Commonwealth sported FC insignias during the Clan invasion or not. Any tidbit of info would be highly appreciated on this topic.  ;)

EDIT: How does one add an image from an attachment to the post body?
« Last Edit: 09 October 2019, 14:27:05 by RazorclawXLS »

ArchonDan

  • Sergeant
  • *
  • Posts: 124
Re: Lyran Guards -- AGOAC mechs
« Reply #1 on: 09 October 2019, 15:10:54 »
They look good! I like the missile racks on the Catapult, nicely done  :thumbsup:

Neo-Tanuki

  • Warrant Officer
  • *
  • Posts: 558
Re: Lyran Guards -- AGOAC mechs
« Reply #2 on: 09 October 2019, 16:00:21 »
I like that BattleMaster!

pixelgeek

  • Master Sergeant
  • *
  • Posts: 258
    • My blog
Re: Lyran Guards -- AGOAC mechs
« Reply #3 on: 09 October 2019, 16:12:40 »
Very nice

jimdigris

  • Catalyst Demo Team
  • Lieutenant Colonel
  • *
  • Posts: 6756
Re: Lyran Guards -- AGOAC mechs
« Reply #4 on: 09 October 2019, 16:26:53 »
 :thumbsup:

Valkerie

  • Captain
  • *
  • Posts: 1732
  • Gravity always wins.
Re: Lyran Guards -- AGOAC mechs
« Reply #5 on: 09 October 2019, 23:32:06 »
Excellent work.  Second the vote on the Battlemaster. 8) :thumbsup:
There is no avoiding war; it can only be postponed to the advantage of others.   -Machiavelli

Outside of a dog, a book is a man's best friend.  Inside of a dog, it's too dark to read.  -Groucho Markx

Greetings, Mechwarrior!  You have been recruited by the Star League to defend the frontier against...Oops, wrong universe.  -unknown SLDF Recruiter

Unit/Scheme of the Month Master Index

EthrDemon

  • Sergeant
  • *
  • Posts: 107
Re: Lyran Guards -- AGOAC mechs
« Reply #6 on: 10 October 2019, 01:49:20 »
Absolutely beautiful.  2nd on loving the Catapult's missile racks, but I think the Wolverine & Shadow Hawk might be my favorites.

avon1985

  • Captain
  • *
  • Posts: 2560
Re: Lyran Guards -- AGOAC mechs
« Reply #7 on: 11 October 2019, 22:02:12 »
Sweet! :thumbsup:

MarauderD

  • Lieutenant
  • *
  • Posts: 1108
Re: Lyran Guards -- AGOAC mechs
« Reply #8 on: 08 July 2020, 20:32:34 »
I finished varnishing my AGOAC mechs, so I thought of showing them off here.

It has been one hour since sunset, so I don't have enough daylight for proper photos and settled on this group shot for now. Will probably do more pics on the weekend.

I painted them as generic Lyran Guards, the only decals I intend to put on them are going to be either Lyran Commonwealth or Federated Commonwealth. I will not be putting unit insignias on them as I intend to milk them as much as possible, so they will represent any and all Lyran Guard unit.

I am not that familiar with lore so I don't know if units from the Lyran portion of Federated Commonwealth sported FC insignias during the Clan invasion or not. Any tidbit of info would be highly appreciated on this topic.  ;)

EDIT: How does one add an image from an attachment to the post body?

Bit of a thread Necro here, but for a good reason.  I%u2019m finishing up a Combine Lance and I want to paint a Lyran guards Lance as the OpFor.  I like the colors you used here:  could you tell me a little about your process and products used so I can try to create a similar Guards Lance?

Thanks in advance!

Mad
« Last Edit: 08 July 2020, 20:36:58 by MarauderD »

RazorclawXLS

  • Sergeant
  • *
  • Posts: 116
Re: Lyran Guards -- AGOAC mechs
« Reply #9 on: 09 July 2020, 15:40:40 »
Bit of a thread Necro here, but for a good reason.  I%u2019m finishing up a Combine Lance and I want to paint a Lyran guards Lance as the OpFor.  I like the colors you used here:  could you tell me a little about your process and products used so I can try to create a similar Guards Lance?

Thanks in advance!

Mad

I primed the figures with Happy Color Gloss White spray paint. I used this one as it was the only gloss or satin white paint I could find locally. I was going for gloss or satin because I opted to use Games Workshop contrast paints - Talassar Blue and Apothecary White. At the time I got those paints, people were saying that it is better to use satin or gloss primer as it improves the flow for the contrast paints.

Apothecary White contrast paint isn't actually white, it's grey, so it must go on a white base for the contrast effect to work. Because I chose white for a primer, I had to apply more than one coat of Talassar blue, because it was too bright for my tastes. After applying Apothecary White I drybrushed the panels with White Scar paint, to get them a bit more white.

For metal, I used GW Leadbelcher, shaded with Nuln Oil, but l switched to Scale 75 Black Metal color. This color is fantastic, the shade is what you would get if you applied Nuln Oil over Leadbelcher, but Black Metal looks so clean and crisp, while the other combination looks stained and it bugs me.

For lasers, PPCs and cockpits I used Games Workshop gemstone colors, Soulstone Blue and Waystone Green. For small lasers and optical devices I used a GW technical paint called Blood for the Blood God. There is a red gemstone color called Spiritstone Red, but I had Blood for the Blood god at hand, so I used that one instead. Before applying these colors you need to paint a metallic paint as base. I used Stormhost Silver for that, which is a light silver paint. Gemstone colors for cockpits are a cheat code, in my opinion. You can get a nice jeweling effect pretty easily, the key is to get a nice coverage and after you paint the cockpit with the gemstone color you want, apply it a bit more on the parts where you want the color to be darker until you get the darker color shade that satisfies you.

« Last Edit: 09 July 2020, 15:43:24 by RazorclawXLS »

MarauderD

  • Lieutenant
  • *
  • Posts: 1108
Re: Lyran Guards -- AGOAC mechs
« Reply #10 on: 09 July 2020, 17:03:42 »
Perfect!  As soon as I get some of the detail work done on the Combine lance I'll get the materials together for the Lyran Guards mechs.  Appreciate the insight!

Mecha82

  • Major
  • *
  • Posts: 5655
  • Honor the Dragon
Re: Lyran Guards -- AGOAC mechs
« Reply #11 on: 09 July 2020, 17:26:31 »
Those look really good. :thumbsup:
Star Captain John Pryde, 3rd Battle Cluster (The Falcon's Honor), Sigma Galaxy, Clan Jade Falcon

Tai-i Jiro Takahashi, 2nd Legion of Vega (The Dragon's Raiders), Draconis Combine

Some things never change.

Wolf72

  • Lieutenant
  • *
  • Posts: 1248
Re: Lyran Guards -- AGOAC mechs
« Reply #12 on: 09 July 2020, 20:52:57 »
amazing.
War does not determine who is right, only who is left. -- said no Clanner ... ever!

KS #1357

Major Headcase

  • Warrant Officer
  • *
  • Posts: 678
  • We're paid to win. Heroism costs extra...
Re: Lyran Guards -- AGOAC mechs
« Reply #13 on: 10 July 2020, 01:37:41 »
Did you have any trouble with the blue contrast paint slipping across the line following panels and contours into the white areas? Every time I've tried a split scheme, it's the little spills into the lighter color that infuriates me! And it seems like cleaning them up has a 50/50 chance of just making them worse!! Ahhhhhhhhh!!!! xp

MarauderD

  • Lieutenant
  • *
  • Posts: 1108
Re: Lyran Guards -- AGOAC mechs
« Reply #14 on: 10 July 2020, 11:31:34 »
Any suggestions for a color for drybrushing over the blue contrast paint?  I'm working on drybrushing and would like something that highlights the blue, even if its only a faint difference.  I'm not great at picking colors--so suggestions are welcome.

Cheers,

Mad

wolfspider

  • Warrant Officer
  • *
  • Posts: 671
Re: Lyran Guards -- AGOAC mechs
« Reply #15 on: 10 July 2020, 18:48:33 »
Very nice :thumbsup: Did you mask off the white from the blue to get those  straight lines?
I may have a low amount of posts but I have a PHD in Battletech and mechs older then most people on this board!

RazorclawXLS

  • Sergeant
  • *
  • Posts: 116
Re: Lyran Guards -- AGOAC mechs
« Reply #16 on: 12 July 2020, 17:58:36 »
Did you have any trouble with the blue contrast paint slipping across the line following panels and contours into the white areas? Every time I've tried a split scheme, it's the little spills into the lighter color that infuriates me! And it seems like cleaning them up has a 50/50 chance of just making them worse!! Ahhhhhhhhh!!!! xp

Very nice :thumbsup: Did you mask off the white from the blue to get those  straight lines?

No, I didn't mask the lines, I did them by hand, and yes there was spills I had to clean several times. Which is why I was looking into buying liquid mask not two days ago. The supplier I get my Vallejo paints from has the Vallejo liquid mask so I will be buying and using that when I paint my next Lyran Guards batch of mechs.


Any suggestions for a color for drybrushing over the blue contrast paint?  I'm working on drybrushing and would like something that highlights the blue, even if its only a faint difference.  I'm not great at picking colors--so suggestions are welcome.

Cheers,

Mad

If you have the means for testing try with a lighter grey color.

 

Register